Diamond saw blade is a cutting tool widely used in the processing of hard and brittle materials such as concrete, refractory materials, stone, ceramics, etc
Diamond saw blades have high hardness and strength, and their manufacturing costs are also very high. The main reason is that the price of diamond blades is expensive. The second reason is that the material requirements of the saw blade substrate are high, resulting in high manufacturing costs that lead to high prices for diamond saw blades
However, due to the sharp and durable characteristics of diamond saw blades, and with the increasingly mature manufacturing technology of diamond saw blades, they are increasingly recognized and accepted by consumers. There are also more and more consumers using diamond saw blades, and then, many enterprise workers only know how to use diamond saw blades, without paying attention to the maintenance of diamond saw blades, and some even have no knowledge of the maintenance methods of diamond saw blades, As a result, the service life of diamond saw blades has been significantly reduced, and their sharp and durable cost performance cannot be brought into play. Next, Luzhou Sifeng Tools will share with you the maintenance methods for diamond saw blades after use
How to maintain diamond saw blades?
1. If the diamond saw blade is not to be used immediately, it should be placed flat or suspended using the inner hole. Other objects or feet should not be stacked on the flat diamond saw blade, and attention should be paid to moisture prevention and rust prevention
2. When the diamond saw blade is no longer sharp and the cutting surface is rough, it must be promptly removed from the saw table and sent to the diamond saw blade manufacturer for regrinding (the fast twin diamond saw blade can be regrinding for 4 to 8 times, with a maximum service life of over 4000 hours). The diamond saw blade is a high-speed cutting tool, and its requirements for dynamic balance are quite high. Do not hand over the diamond saw blade to a non professional manufacturer for regrinding. Grinding cannot change the original angle or damage the dynamic balance
3. The inner diameter correction and positioning hole processing of diamond saw blades must be carried out by the manufacturer. If the processing is poor, it may affect the use effect of the product and may cause danger. In principle, the reaming should not exceed the original aperture by 20mm to avoid affecting the stress balance
