uscom

When in use, the diamond saw blade cutting machine is mainly used for cutting the outer circle of the diamond saw blade. When in use, the diameter of the saw blade is 150-230mm (other specifications are customized according to requirements). In use, PLC and servo control system are mainly used, and the efficiency is significantly improved. For saw blades with different diameters, the position of the grinding wheel is automatically adjusted to save manpower and avoid manual misoperation.

All parameters of the diamond saw blade cutting machine can be set through the touch screen, which is very simple to operate. The quick clamping system makes the replacement of the saw blade shaft more convenient and rapid.

Main characteristics of diamond saw blade cutting machine

1.  Three grinding heads.

2.  One time clamping, complete the cutting edge of the whole saw blade.

3.  The cooling water system takes away dust and abrasive.

4.  Double grinding heads, automatic turning over, single-sided cutting edge on both sides at the same time.

The diamond saw blade cutting machine has two stations and four feeding tables, which can automatically load and unload, automatically identify whether there is material, automatically switch the feeding table, and do not stop due to loading and unloading. The feed amount is adaptively and evenly distributed in each swing to achieve uniform feed. The feed amount and swing times can be freely set according to the variety of saw blades.

Application advantages of diamond saw blade cutting machine

1.  The diamond saw blade cutting machine has the function of counting the shift output and total output.

2.  Digital display of grinding wheel allowance;

3.  Adjustable swing amplitude: the swing amplitude of the grinding wheel can be easily adjusted according to the different width of the cutter head;

4.  The main components are Taiwan imported brands: Delta PLC and touch screen, pneumatic components;

5.  Manual operation function: (it is convenient to debug the machine and handle the saw blade separately) large plate rotation, manual feeding, manual blanking, material table switching, manual turnover, system reset, emergency shutdown. The front wheel starts and stops, the reverse wheel starts and stops, the front clutch disconnects and closes, the reverse clutch disconnects and closes, the front saw blade motor starts and stops, the reverse saw blade motor starts and stops, the front swing motor starts and stops, and the reverse swing motor starts and stops.

6.  Single side separate grinding function: the machine can select the front and back sides to be grinded separately (processing fragments can be processed separately)

7.  Full automatic grinding function: just install the unprocessed saw blade and remove the processed saw blade (120 blades can be loaded at a time);

8.  Machine processing efficiency: it takes 8 seconds to process a piece on both sides. The theoretical output of 8-hour shift is 3600 pieces.

9.  Specification range of processing saw blade: Ф 95mm~ Ф 188mm

10.  Grinding wheel consumption: Ф 200. One piece of silicon carbide with particle size of 46 can be ground Ф 105 saw blade about 160 pieces (double-sided, grinding wheel tail core Ф 65）。

11.  Total power of the machine: 6.8kw.